DIS-HDP 5.7

Technical features

ø: 80 - 300mm

Scoring saw blade

Low noise and no vibration

Diamond scoring saw blade for sizing panels of abrasive materials

HDP:5.7

for single panels or stacks

Fits on to:

flange or motor arbor

D	d	B	b	Z	HDP	tooth	COMBO	CODE
80	20	3.1-3.6	2.2	12	5,7	KON/FZ	-	DIS010
100	20	3.1-4.1	2.2	20	5,7	KON/FZ	-	DIS020
100	22	3.1-4.1	2.2	20	5,7	KON/FZ	-	DIS030
120	20	3.1-4.1	2.2	24	5,7	KON/FZ	-	DIS040
120	20	3.4-4.2	2.5	24	5,7	KON/FZ	-	DIS050
120	22	3.1-4.1	2.2	24	5,7	KON/FZ	-	DIS060
125	20	3.1-4.1	2.2	24	5,7	KON/FZ	-	DIS070
125	20	3.4-4.2	2.2	24	5,7	KON/FZ	-	DIS080
125	20	4.3-5.5	3.2	24	5,7	KON/FZ	-	DIS090
125	22	3.1-4.1	2.2	24	5,7	KON/FZ	-	DIS100
125	45	4.3-5.5	3.2	24	5,7	KON/FZ	-	DIS110
140	16	3.1-4.1	2.2	24	5,7	KON/FZ	1/16/33	DIS120
150	45	4.3-5.5	3.2	36	5,7	KON/FZ	3/11/70	DIS130
160	45	4.3-5.5	3.2	36	5,7	KON/FZ	3/11/70	DIS140
160	55	4.3-5.3	3.2	36	5,7	KON/FZ	3/7/66 + 3/6/84	DIS160
180	20	4.3-5.5	3.2	36	5,7	KON/FZ	-	DIS170
180	30	4.4-5.3	3.2	36	5,7	KON/FZ	-	DIS180
180	45	4.3-5.5	3.2	36	5,7	KON/FZ	-	DIS190
180	45	4.8-5.6	3.5	36	5,7	KON/FZ	-	DIS200
180	55	5.0-6.2	3.5	36	5,7	KON/FZ	-	DIS210
180	50	4.3-5.5	3.2	48	5,7	KON/FZ	3/12/80	DIS220
200	20	4.4-5.3	3.2	36	5,7	KON/FZ	-	DIS230
200	45	4.7-6.0	3.5	36	5,7	KON/FZ	-	DIS240
200	45	4.3-5.3	3.2	36	5,7	KON/FZ	-	DIS250
200	65	4.4-5.3	3.2	36	5,7	KON/FZ	2/9/100 + 2/9/110	DIS260
215	50	4.3-5.3	3.2	42	5,7	KON/FZ	3/15/80	DIS270
300	50	4.3-5.5	3.2	48	5,7	KON/FZ	3/15/80	DIS280
300	65	4.3-5.5	3.2	72	5,7	KON/FZ	2/9/100 + 2/9/110	DIS290

Fill in the form below and you will be contacted by one of our operators.